Skip to content

Wood Stove Parts

When one pipe section splits at a joint, a connector fails after years of thermal cycling, or a masonry chimney needs a bare liner replacement without a full hardware kit, buying only the failed component is the right path. Tracking down replacement wood stove parts by diameter, wall type, and SKU takes time, and ordering the wrong section means a second return before the stove runs again.

Wood stove parts are the individual components of a venting system: single-wall and double-wall stovepipe sections, stove connectors, stainless steel flue liners, and installation hardware sold as standalone pieces rather than bundled kits. These wood burning stove parts serve two buyer types: the homeowner replacing one worn section in an existing system, and the new-install buyer sourcing components individually. Fire Pit Surplus carries confirmed parts SKUs across these categories, all matched to the wood stoves in the main lineup.

Price Match

Found it cheaper? We'll match it.

Fast & Free Shipping

Free shipping on most orders, freight included on select items

Expert Support

Call us at 888-671-4611

Authorized Dealer

Factory-authorized retailer for every brand we carry

Flexible Financing

Buy now, pay later with Bread Pay

Β 

Β 

Why Choose Wood Stove Parts

  • Individual Components, No Bundle Required: Buy one replacement connector, a single double-wall pipe section, or bare stainless flue liner material without paying for hardware already on the shelf. For buyers who need one individual part to complete a run, individual SKUs are the cost-efficient path. For a full new installation, the wood stove pipe kits collection handles complete bundled systems.
  • Single-Wall and Double-Wall Options Stocked: Both single wall pipe connectors and double wall pipe sections are confirmed in this collection, covering the two most common configurations where the stove meets the chimney system.
  • Stainless Steel Flue Liner for Chimney Relines: The stainless steel flue liner in this collection covers masonry chimney relines where bare liner material is all that is needed, without the full hardware kit. Browse wood stove accessories for complementary products across the full installation.
  • Pellet Stove Parts Are a Separate Category: Pellet stove parts use different venting standards and pipe diameters than wood stove components. Parts in this collection are scoped to wood-burning appliances only. Confirm appliance type before ordering.

Β 

Β 

Top Wood Stove Parts For Sale

Best Fresh Air Intake Kit

Drolet 5" Fresh Air Intake Kit For Wood Stove On Pedestal AC01336

Drolet 5 inch fresh air intake kit for wood stove on pedestal

The AC01336 fresh air intake kit is the individual wood stove part that solves combustion air problems in tight modern homes where pressure imbalances starve the firebox of the outside air needed for clean burns. The 5-inch kit draws combustion air directly from outside, eliminating the need to crack a window during cold-weather burns. Includes the adapter, two clamps, wall termination, and all installation hardware.

  • 5-inch diameter; draws combustion air from outside the home to the stove base
  • Pedestal-mount configuration; compatible with select Drolet freestanding wood stoves
  • Includes adapter, two clamps, wall termination cap, and installation screws

Best Wood Stove Blower Assembly

Drolet Blower Assembly With Variable Speed Control (Up To 100 CFM) AC02050

Drolet blower assembly with variable speed control up to 100 CFM

The AC02050 blower assembly is the top-selling individual wood burning stove part in the lineup, adding forced air circulation to stoves that rely on natural convection alone. Variable speed control lets the homeowner dial airflow from quiet background circulation up to 100 CFM for rapid room heating. Compatible with Drolet stoves and other models using a standard blower mounting plate.

  • Up to 100 CFM output; variable speed control dial; quiet multi-speed operation
  • 8-foot power cord; standard AC outlet connection; no hardwiring required
  • Fits Drolet and compatible wood stove models with blower mounting plate

Best Double-Wall Pipe Kit

Drolet 6" Vortex To-The-Ceiling Double Wall Pipe Kit VODBKTC06

Drolet 6 inch Vortex to the ceiling double wall pipe kit

The VODBKTC06 is the 6-inch double-wall stove pipe kit for installations where the stovepipe connector runs from the flue collar straight up to the ceiling support box. The telescoping section adjusts from 38 to 70 inches, covering standard ceiling heights without field cutting. Double-wall construction maintains higher flue temperatures than single-wall stovepipe, reducing creosote buildup across the full connector run.

  • 6-inch diameter; double-wall pipe; 38"–70" telescoping section
  • To-the-ceiling configuration; appliance connector and 36 installation screws included
  • Reduces clearances to combustibles vs single-wall; rated for wood-burning stoves

Β 

Β 

What to Look for in Stovepipe and Liner Parts

Pipe Wall Type and Clearance Requirements

  • Single-wall for standard interior runs: Single-wall black pipe is the correct choice where the connector run maintains the standard 18-inch clearance to unprotected combustibles. It is the least expensive individual part option and the most common replacement stove pipe for wood stove installations with adequate wall clearance.
  • Double-wall for reduced clearances: Double-wall stove pipe maintains higher flue temperatures and qualifies for shorter clearance distances in most jurisdictions. Where the run passes near a combustible wall or the installation space is tight, double-wall is the code-correct choice. The Vortex double-wall series covers both standard sections and a section with an integrated wood stove damper.
  • Never mix wall types at a joint without an adapter: Single-wall and double-wall pipe use different connection methods. A mismatched joint at a replacement section creates smoke leak points. Confirm the wall type of the existing run before ordering any individual wood stove pipe section.

Pipe Diameter and Flue Collar Match

  • Match diameter to the stove's flue collar: All wood stove chimney parts must match the collar diameter on the stove's outlet. The most common residential size is a wood stove 6 inch pipe. Check the spec plate before ordering; 5-inch and 7-inch sections are stocked for stoves that specify them.
  • Wood stove flue liner diameter follows the same rule: For masonry chimney relines, the liner diameter should not exceed twice the stove's flue collar area. An oversized stainless steel flue liner holds cool air the stove cannot heat fast enough to sustain draft.
  • Elbows, tees, and reducers for transitions: A wood stove elbow changes direction in the stovepipe run; a wood stove tee is used at cleanout access points; a wood stove reducer bridges diameter changes between the stove outlet and the chimney flue. Individual fittings are available as standalone parts for runs that require a change in angle or diameter.

Component Compatibility and Installation Order

  • Connector first, liner second: The wood stove pipe connector runs from the stove's flue collar to the wall thimble or ceiling support. The stainless flue liner runs inside the masonry chimney from that thimble to the termination cap. Both must match in diameter. For a complete new venting system, the wood stove pipe kits collection bundles both components.
  • Damper section placement: A flue damper section belongs in the stovepipe connector run inside the heated space, not in the chimney liner section above the ceiling. The Vortex double-wall section with damper (VOD0190) installs directly in the connector run for draw control during stove startup.
  • Measure before ordering a replacement: Note the outside diameter, wall type (single or double), and section length of the existing piece before ordering individual replacement parts. One wrong measurement adds a return shipment and delays the installation.

Β 

Β 

Types of Stovepipe and Liner Components

Blower assembly with variable speed control

Blower assemblies and speed controls

Add forced air circulation to wood stoves that distribute heat by natural convection alone. The Drolet Blower Assembly AC02050 is the top-selling individual part in this category, delivering up to 100 CFM with variable speed control. Thermodisc controls like the AC02055 automate blower activation by heat level without a manual switch.

Fresh air intake kit for wood stove on pedestal

Fresh air intake kits

Solve combustion air problems in energy-efficient homes where negative pressure or tight construction restricts the outside air supply needed for clean burning. The AC01336 5-inch intake kit is a standalone wood stove part that routes outside air to the stove base without structural modifications. Browse wood stove accessories for complementary installation components.

Vortex to the ceiling double wall pipe kit

Double-wall stovepipe sections and kits

Use an air gap between inner and outer walls to maintain higher flue temperatures and qualify for reduced clearances to combustibles. The VODBKTC06 to-the-ceiling kit handles 6-inch to-the-ceiling runs; buyers needing through-the-wall runs should see the VODBKTW06.

Β 

Β 

Why Buy from Fire Pit Surplus

  • Price Match Guarantee: We match competitor prices on identical products. Find the same wood stove parts for less and we'll match it.
  • Fast and Free Shipping: Every order ships free with secure, insured delivery. Replacement parts ship fully packaged to arrive in installation-ready condition.
  • Expert Support: Real people who know these products answer your questions before purchase, during delivery, and after installation.
  • Authorized Dealer: We carry every brand as an authorized retailer, which means genuine products and full manufacturer warranties honored on every order.
  • Flexible Financing: Pay over time with financing options that let you get the setup you actually want, not the one the budget forced you to settle for.

Β 

Β 

Frequently Asked Questions

What parts do I need to install a wood stove?

At minimum: a stove connector from the flue collar to the wall thimble, a chimney liner or flue pipe to the rooftop cap, and a termination cap. Most installs also need a storm collar and top plate. Specific parts depend on chimney type and stove model.

What is the difference between a stove pipe connector and a chimney liner?

A stove pipe connector is the black pipe that runs from the stove's flue collar through the heated space to the wall thimble. A chimney liner is the stainless steel flue liner running inside the masonry chimney from that point to the rooftop termination cap.

Can I buy individual pipe sections instead of a full kit?

Yes. Individual single-wall and double-wall sections are available in standard diameters. Buying individual parts makes sense when replacing one worn section or completing an existing run. For a full new installation, a bundled pipe kit typically costs less overall.

Is single-wall or double-wall pipe better for my wood stove?

Single-wall pipe works for interior heated-space runs. Double-wall pipe maintains higher flue temperatures, reduces creosote buildup, and allows shorter clearances to combustibles. Check local codes for which type is required for your specific installation before ordering.

How do I know what size flue liner my wood stove needs?

Match the liner diameter to the stove's flue collar. A 6-inch collar needs a 6-inch stainless steel flue liner. Flue area should not exceed twice the collar area. An oversized liner reduces draft by holding cool air the stove cannot heat fast enough to sustain draw.

Do you carry replacement grates for wood stoves?

Wood burning stove grates are being added to this collection. Cast iron grate and steel grate options will be listed as SKUs are sourced. For current availability, all confirmed stovepipe and liner SKUs are listed above. Contact support with any grate requests.

Β 

Β 

Shop Wood Stove Parts at Fire Pit Surplus

Whether one stovepipe section needs replacing or a masonry chimney reline is on the schedule, the right individual part ships without paying for a full kit of wood stove hardware already on the shelf. Every confirmed part in this collection has been matched to the stove models and venting configurations that buyers in this category actually need.

Browse the full inventory above, or contact the support team with the stove model, flue collar size, and pipe wall type confirmed. For buyers starting a complete venting installation from scratch, the wood stove pipe kits collection covers full bundled systems. The wood stove accessories range covers hearth tools, fans, and thermometers for buyers equipping their installation beyond the pipe run.

Shop Wood Stove Parts Now