Vogelzang VG5717-P Pellet Stove 90 lb Hopper Freestanding

The VG5717-P is designed to efficiently heat spaces up to 1,700 square feet, making it well-suited for medium-sized homes, open-concept living areas, cabins, and shops. Actual heating performance can vary based on insulation quality, ceiling height, climate, and home layout, so colder regions or poorly insulated spaces may experience slightly reduced coverage.

On the lowest heat setting, a full 90-pound hopper can provide up to 45–47 hours of continuous operation, which is roughly two full days of warmth without refueling. Burn time will be shorter at higher heat settings, but the oversized hopper still significantly reduces refueling frequency compared to smaller 40–60 lb. units.

Yes. Because it exceeds 75% heating efficiency, the VG5717-P qualifies for the IRS Section 25C Residential Energy Tax Credit, allowing eligible homeowners to claim 30% of the purchase and installation cost (up to applicable annual limits). Save your receipts and consult a tax professional to confirm eligibility for your specific situation.

The VG5717-P requires 3-inch listed pellet vent pipe (PL vent) for safe exhaust. It can be vented horizontally through an exterior wall or vertically through the ceiling/roof, depending on your installation. Always follow the clearances, vent configurations, and termination requirements outlined in the owner's manual, and use only UL-listed pellet venting components.

Yes. The Vogelzang VG5717-P is approved for installation in residential, manufactured, and mobile homes in both the USA and Canada. Mobile home installations require additional components, including an outside combustion air intake and proper anchoring of the unit per the manufacturer's instructions and local code requirements.

No. Like all modern pellet stoves, the VG5717-P relies on 120V electricity to run the auger, combustion blower, convection blower, and control board. If continuous operation during outages is important, you can pair the stove with a battery backup system, inverter, or small generator sized to handle the stove's electrical load.

For best performance, use premium-grade wood pellets that meet PFI standards — typically with a heat content greater than 8,200 BTU/lb, moisture under 8%, ash content under 1%, and salt under 300 ppm. Avoid wet, sawdust-heavy, or low-grade pellets, which can reduce efficiency, increase ash buildup, and potentially cause auger jams.

Routine maintenance includes daily or every-other-day cleaning of the burn pot and ash pan during heavy use, periodic vacuuming of the firebox and heat exchanger, and a full deep cleaning of the venting, blowers, and internal components at least once per heating season. Following the recommended maintenance schedule in the owner's manual will keep the stove burning cleanly and extend its service life.