STOVE CONNECTOR SINGLE WALL BLACK PIPE - 8"Ø SP00352

This single wall black stove pipe connector requires a minimum clearance of 18 inches to any combustible materials, including walls, ceilings, wood mantles, and furniture. This unshielded clearance requirement is standard for all single wall stove pipe installations and is critical for fire safety. If you need to reduce clearances, consider using heat shields or switching to double-wall insulated pipe for areas where 18-inch clearances cannot be maintained.

No, single wall black stove pipe connectors should never be installed through combustible walls, ceilings, or enclosed chases. Single wall pipe is designed exclusively for indoor visible runs from your wood stove to a thimble, ceiling support box, or masonry chimney entry point. Where pipe must pass through a wall or ceiling, you must transition to Class A chimney pipe or use approved wall thimbles with proper clearances and protection.

This connector is manufactured from 22 gauge cold rolled steel, which is significantly thicker and more durable than the 24 gauge alternatives commonly found at retail stores. The thicker 22 gauge steel provides approximately 9% more material thickness, resulting in better heat resistance, longer product life, reduced warping over time, and superior structural integrity. The welded seam construction (rather than crimped) further enhances durability and creates a more professional appearance.

The SP00352 connector comes with a Limited Lifetime Warranty that provides peace of mind for your investment. This warranty typically covers manufacturing defects, material failures, and construction issues that arise under normal residential use. The warranty demonstrates the manufacturer's confidence in their premium materials and welded construction. For specific warranty terms, conditions, and claim procedures, consult the product documentation or contact the manufacturer directly.

Yes, each pipe connection should be secured using a minimum of three sheet metal screws to ensure a safe, secure, and draft-tight seal. This prevents pipes from separating due to thermal expansion, vibration, or accidental contact. When installing, ensure the crimped end of any connecting pipe is oriented toward the stove to allow condensation and creosote to flow downward inside the pipe rather than leaking at joints. Use appropriate length screws that penetrate both layers without protruding into the flue passage.

This 22 gauge welded single wall connector is suitable for both residential and commercial wood burning or coal burning applications. The heavy-duty construction and premium materials make it appropriate for high-use environments such as restaurants, workshops, or facilities with frequent heating demands. However, always ensure your installation meets local building codes and fire safety regulations, which may have additional requirements for commercial installations including inspection schedules and clearance specifications.

Single wall stove pipe requires regular inspection and cleaning to maintain safe, efficient operation. At minimum, inspect your connector and entire pipe system annually before heating season for signs of corrosion, warping, or creosote buildup. Clean the interior surfaces whenever creosote accumulation is visible or reaches 1/8 inch thickness. Check all screw connections to ensure they remain tight, and verify that clearances to combustibles have been maintained. Replace any sections showing rust-through, significant warping, or damage that could compromise safety or draft performance.

This connector is specifically designed for 8-inch diameter applications and should only be used with stoves featuring 8-inch flue collar outlets. Using mismatched sizes can create dangerous gaps, poor draft, smoke leakage, and void your stove warranty. If your stove has a different size flue collar (such as 6-inch or 7-inch), you should use the appropriately sized connector (SP00350 for 6-inch or SP00351 for 7-inch). In some cases, certified reducer or increaser adapters may be available, but always consult your stove manufacturer's specifications before using adapters.