6" VORTEX DOUBLE WALL TEE WITH CAP VOD0110

The double wall tee serves multiple important functions in your wood stove venting system. It creates an offset connection when you need to navigate around obstacles or change the direction of your venting path. The included cap provides crucial access for inspection, maintenance, and cleaning of your chimney system - simply remove the cap to access the interior for creosote removal and system checks. This component is essential for maintaining optimal performance and safety throughout the heating season.

The Vortex Double Wall Tee requires only 6 inches of clearance to combustible side walls and 6 inches to combustible ceilings - a significant safety improvement over single wall pipe which requires 18 inches. If your installation uses pipe sections with no adjustable lengths, you can reduce clearances even further to just 5 inches. Always verify that your wood stove itself maintains its required clearances as specified by the manufacturer, as the appliance clearances must also be met regardless of the pipe clearances.

The VOD0110 6" Vortex Double Wall Tee is compatible with all wood stoves, freestanding fireplaces, and wood furnaces that have a 6-inch flue diameter. This includes popular brands such as Drolet, Century, Englander, Buck Stove, Enerzone, and Osburn. As long as your appliance has a 6-inch outlet and is designed for solid fuel burning, this tee will work perfectly in your venting system. The universal design ensures compatibility across manufacturers.

The Vortex Double Wall Tee meets and exceeds all major North American safety standards and has been thoroughly tested and listed by recognized certification bodies. It complies with NFPA 211 (National Fire Protection Association), CSA B365 (Canadian Standards Association), UL 103 HT (Underwriters Laboratories High Temperature), and ULCS629 standards. These certifications ensure the product has undergone rigorous safety testing and meets all requirements for safe installation in residential and commercial applications throughout the United States and Canada.

Installation is straightforward with the Vortex easy-connect system. Position the tee where needed in your offset configuration, ensuring proper clearances to combustibles. Connect the tee to adjacent pipe sections using a minimum of three #8 x 1/2" self-drilling screws at each joint to ensure secure, gas-tight connections. If you have a horizontal run exceeding 4 feet, install a pipe hanger for proper support (add additional hangers every 4 feet). The cap should remain accessible for future maintenance. Always follow the manufacturer's complete installation instructions and local building codes. Professional installation is recommended if you're unfamiliar with venting systems.

Double wall pipe offers significant advantages over single wall construction. The air-insulated design with thermal weave technology maintains higher flue gas temperatures, creating stronger draft and reducing creosote formation. The reduced clearances (6 inches vs 18 inches) provide much more flexibility in installation locations. The stainless steel inner wall heats up faster, stays hot longer, and has the same life expectancy as your chimney system. Single wall pipe typically requires replacement every 2-3 years with daily use, while double wall construction with stainless steel inner walls lasts for decades. The black powder coat finish is also more attractive and corrosion-resistant than bare steel.

No, you should only use Vortex Double Wall connector pipe and listed components throughout your installation. Do not mix with other manufacturers' products or install any damaged components. Mixing brands can compromise the safety certifications, create improper connections, and potentially violate building codes. Using components from different manufacturers may result in gaps, poor fit, inadequate sealing, or incorrect clearances that could lead to dangerous situations. Always use matching Vortex components for the entire run from your appliance to your chimney connection.

You should inspect and clean your entire venting system, including the tee, at least once per year before the heating season begins. If you burn your wood stove daily throughout the winter, mid-season inspection and cleaning may also be necessary depending on your wood quality and burning practices. Remove the tee cap to access the interior and check for creosote buildup. Clean as needed using appropriate chimney brushes and tools. Regular maintenance through the accessible tee cap ensures safe operation, maintains optimal draft, and extends the life of your entire venting system. Excessive creosote buildup can lead to dangerous chimney fires.