DuraVent DuraPlus Ceiling Chimney Kit Features
- Everything Above The Ceiling, In One Box: The support box, six feet of insulated Class A chimney, the flashing, the storm collar, the cap and the adapter that joins your stovepipe to it. This is the part of a wood stove install that gets ordered piecemeal and ends up one piece short on install day. Here it arrives together.
- DuraPlus Ceiling Support Box: Carries the weight of the chimney above it and gives the stovepipe a finished transition below. Flat version ships with its trim collar, so the ceiling is finished the day the kit arrives. Cathedral version for a vaulted or pitched ceiling.
- Two 36 in. DuraPlus Chimney Lengths: Triple wall insulated Class A chimney, six feet total. Enough to clear a standard ceiling and finish the required height above the roof line. Twist lock joints, no screws or sealant.
- Roof Flashing And Storm Collar: Flashing matched to your roof pitch, 0 to 6/12 for a low roof or 7 to 12/12 for a steep one, with the storm collar that seals the pipe where it leaves the flashing. Water in the chimney chase is what rots a roof deck.
- Stainless Steel Chimney Cap: Keeps rain, snow and birds out of the flue while letting it draft. Stainless so it outlasts the roof it sits on.
- Stovepipe To Chimney Adapter: The 6DVL-ADT joins either DVL double wall or DuraBlack single wall stovepipe to the Class A chimney at the support box, with a trim ring. Without it the two systems do not connect.
DuraVent DuraPlus Ceiling Chimney Kit Specs
| Kit Part Numbers | 6DP-CS11 or 6DP-CS24, 2 x 6DP-36CF, 6DP-F6 or 6DP-F12, 6DP-SC, 6DP-VC, 6DVL-ADT |
| Inner Diameter | 6 in. |
| Chimney Pipe | DuraPlus Class A, triple wall, 2 x 36 in. (6 ft. total) |
| Construction | Stainless steel inner wall, ceramic blanket insulation, ventilated air space, galvanized outer wall |
| Support Box | Flat 11 in. box with trim collar, or cathedral box for vaulted and pitched ceilings |
| Roof Flashing | Galvanized, 0/12 to 6/12 or 7/12 to 12/12 pitch |
| Storm Collar | 6DP-SC |
| Chimney Cap | Stainless steel, 6DP-VC |
| Adapter | 6DVL-ADT, joins DVL or DuraBlack stovepipe to Class A |
| Clearance To Combustibles | 2 in. (DuraPlus chimney) |
| Listing | UL 103 HT |
| Fuel | Wood, all fuel |
DuraVent DuraPlus Ceiling Chimney Kit FAQ
What is included in the kit?
A DuraPlus ceiling support box (flat with trim collar, or cathedral), two 36 in. DuraPlus Class A chimney lengths, roof flashing for your pitch, a storm collar, a stainless steel chimney cap and the 6DVL-ADT adapter that joins your stovepipe to the chimney. Every part is DuraVent and every joint twist locks.
Which configuration do I pick?
Flat ceiling if the ceiling is horizontal, cathedral if it is vaulted or pitched. Then match the flashing to your roof: 0 to 6/12 for a low pitch, 7 to 12/12 for a steep one. If you are not sure of the pitch, call us and we will work it out from a photo.
Is 6 ft. of chimney enough?
For a normal 8 ft. ceiling, yes. Six feet takes the chimney through the attic and to the required height above the roof, which is 3 ft. above where it exits and 2 ft. above anything within 10 ft. A taller room or a steep roof may need one more 36 in. length, which we sell separately.
What is not in the kit?
The interior stovepipe from the stove to the ceiling, which is a separate kit in DVL double wall or DuraBlack single wall. An attic insulation shield, which is only needed where the chimney passes through insulation. And a roof bracket, which DuraVent requires once more than 5 ft. of chimney is exposed above the roof.
Does it fit my stove?
This is a 6 in. system, which is the flue size on most wood stoves. Check the flue collar on your stove or its manual. The 6DVL-ADT adapter in the kit accepts either DVL double wall or DuraBlack single wall stovepipe.
How does it ship?
Free shipping to the continental United States. The kit ships by parcel in a few boxes, not on a pallet. For a current delivery estimate call 888-671-4611 or start a live chat and we will check it for you.
Where can I find the installation instructions?
The DuraPlus all fuel chimney installation instructions cover the support box, the through roof assembly and the height rules. Follow them and your stove manual to keep the listing and warranty valid.
Free Shipping To All Lower 48 States Over $199. All Fire Pits, Bowls, and Heating Products Ship Via Freight LTL Curbside. To Read More About Our Shipping Police. Click Here.
With more than 800+ positive reviews about Fire Pit Surplus, we are confident we can provide you with an excellent buying experience. Read more about how we stand out above the rest on our Why Buy From Us page.
DuraVent DuraPlus Ceiling Chimney Kit Features
- Everything Above The Ceiling, In One Box: The support box, six feet of insulated Class A chimney, the flashing, the storm collar, the cap and the adapter that joins your stovepipe to it. This is the part of a wood stove install that gets ordered piecemeal and ends up one piece short on install day. Here it arrives together.
- DuraPlus Ceiling Support Box: Carries the weight of the chimney above it and gives the stovepipe a finished transition below. Flat version ships with its trim collar, so the ceiling is finished the day the kit arrives. Cathedral version for a vaulted or pitched ceiling.
- Two 36 in. DuraPlus Chimney Lengths: Triple wall insulated Class A chimney, six feet total. Enough to clear a standard ceiling and finish the required height above the roof line. Twist lock joints, no screws or sealant.
- Roof Flashing And Storm Collar: Flashing matched to your roof pitch, 0 to 6/12 for a low roof or 7 to 12/12 for a steep one, with the storm collar that seals the pipe where it leaves the flashing. Water in the chimney chase is what rots a roof deck.
- Stainless Steel Chimney Cap: Keeps rain, snow and birds out of the flue while letting it draft. Stainless so it outlasts the roof it sits on.
- Stovepipe To Chimney Adapter: The 6DVL-ADT joins either DVL double wall or DuraBlack single wall stovepipe to the Class A chimney at the support box, with a trim ring. Without it the two systems do not connect.
DuraVent DuraPlus Ceiling Chimney Kit Specs
| Kit Part Numbers | 6DP-CS11 or 6DP-CS24, 2 x 6DP-36CF, 6DP-F6 or 6DP-F12, 6DP-SC, 6DP-VC, 6DVL-ADT |
| Inner Diameter | 6 in. |
| Chimney Pipe | DuraPlus Class A, triple wall, 2 x 36 in. (6 ft. total) |
| Construction | Stainless steel inner wall, ceramic blanket insulation, ventilated air space, galvanized outer wall |
| Support Box | Flat 11 in. box with trim collar, or cathedral box for vaulted and pitched ceilings |
| Roof Flashing | Galvanized, 0/12 to 6/12 or 7/12 to 12/12 pitch |
| Storm Collar | 6DP-SC |
| Chimney Cap | Stainless steel, 6DP-VC |
| Adapter | 6DVL-ADT, joins DVL or DuraBlack stovepipe to Class A |
| Clearance To Combustibles | 2 in. (DuraPlus chimney) |
| Listing | UL 103 HT |
| Fuel | Wood, all fuel |
DuraVent DuraPlus Ceiling Chimney Kit FAQ
What is included in the kit?
A DuraPlus ceiling support box (flat with trim collar, or cathedral), two 36 in. DuraPlus Class A chimney lengths, roof flashing for your pitch, a storm collar, a stainless steel chimney cap and the 6DVL-ADT adapter that joins your stovepipe to the chimney. Every part is DuraVent and every joint twist locks.
Which configuration do I pick?
Flat ceiling if the ceiling is horizontal, cathedral if it is vaulted or pitched. Then match the flashing to your roof: 0 to 6/12 for a low pitch, 7 to 12/12 for a steep one. If you are not sure of the pitch, call us and we will work it out from a photo.
Is 6 ft. of chimney enough?
For a normal 8 ft. ceiling, yes. Six feet takes the chimney through the attic and to the required height above the roof, which is 3 ft. above where it exits and 2 ft. above anything within 10 ft. A taller room or a steep roof may need one more 36 in. length, which we sell separately.
What is not in the kit?
The interior stovepipe from the stove to the ceiling, which is a separate kit in DVL double wall or DuraBlack single wall. An attic insulation shield, which is only needed where the chimney passes through insulation. And a roof bracket, which DuraVent requires once more than 5 ft. of chimney is exposed above the roof.
Does it fit my stove?
This is a 6 in. system, which is the flue size on most wood stoves. Check the flue collar on your stove or its manual. The 6DVL-ADT adapter in the kit accepts either DVL double wall or DuraBlack single wall stovepipe.
How does it ship?
Free shipping to the continental United States. The kit ships by parcel in a few boxes, not on a pallet. For a current delivery estimate call 888-671-4611 or start a live chat and we will check it for you.
Where can I find the installation instructions?
The DuraPlus all fuel chimney installation instructions cover the support box, the through roof assembly and the height rules. Follow them and your stove manual to keep the listing and warranty valid.
Free Shipping To All Lower 48 States Over $199. All Fire Pits, Bowls, and Heating Products Ship Via Freight LTL Curbside. To Read More About Our Shipping Police. Click Here.
With more than 800+ positive reviews about Fire Pit Surplus, we are confident we can provide you with an excellent buying experience. Read more about how we stand out above the rest on our Why Buy From Us page.