Dimplex IgniteXL Bold 50-inch Smart Linear Built-In Electric Fireplace

Yes, the XLF5017-XD is now outdoor-rated for approved covered outdoor installations such as screened porches, covered patios, and outdoor kitchens, provided the installation strictly follows the manufacturer's instructions in the owner's manual. The fireplace must be protected from direct exposure to rain, snow, and standing water. For uncovered or fully exposed outdoor locations, this unit is not approved - always reference the installation manual for environmental requirements before installation.

The IgniteXL Bold 50" is a hardwired unit that requires a dedicated 15-amp circuit and can be wired for either 120V or 240V electricity. On 120V it draws 12.5 amps and produces 5,000 BTU; on 240V it draws 10.4 amps and produces a stronger 8,530 BTU of heat. When connected to 120V, the unit can also be controlled by a wall switch. If you prefer a plug-in installation rather than direct wiring, an optional plug kit (Dimplex model XLFXDPLUG) is sold separately. We strongly recommend installation by a licensed electrician.

The XLF5017-XD offers four distinct installation configurations from the same chassis, which is industry-unique: front-facing only, front with left side viewing, front with right side viewing, or full three-sided bay installation. The fireplace ships with both glass side panels and solid side panels - simply install or remove them to achieve your desired look. This makes it ideal for peninsula walls, room dividers, corner installations, and traditional flush-wall builds without needing to special-order a different model.

No. As an electric fireplace, the Dimplex IgniteXL Bold requires no chimney, no gas line, no venting, and produces no smoke, fumes, ash, or real combustion byproducts. Installation only requires a properly sized framed opening, a dedicated 15-amp electrical circuit, and proper clearances per the installation manual. This makes it significantly easier and less expensive to install than a gas or wood-burning fireplace, and ideal for condos, apartments, basements, bedrooms, and other locations where venting would be impractical.

The XLF5017-XD is both Wi-Fi and Bluetooth enabled, and pairs with the free Dimplex Flame Connect app available for iOS and Android. Once connected to your home Wi-Fi network, you can control every feature of the fireplace from your smartphone or tablet - including powering it on/off, adjusting flame color and speed, changing media bed lighting, setting the timer, controlling heat output, and switching between modes. The fireplace also includes a multi-function remote and on-screen touch controls on the top right of the glass for traditional operation.

Absolutely. The flames and the heater operate completely independently on the IgniteXL Bold, so you can enjoy the ambiance of the fire effect during warm summer months without adding any heat to the room. The heater can be deactivated through the controls or hard-disconnected during installation if you never plan to use it. Additionally, an Air Circulation Mode runs the fan without heat to keep room air fresh. The Comfort$aver® heater is designed for supplemental zone heating up to 1,000 sq. ft.

These are two intelligent heat management modes designed for energy efficiency and comfort. Eco Mode automatically reduces the wattage range and modulates output to maintain your set temperature using the minimum energy required, helping reduce operating costs over long periods of use. Heat Boost does the opposite - it runs the heater at maximum output for up to 20 minutes to quickly warm a cold room, then returns to normal operation. Combined with the patented Comfort$aver® ceramic heating system, the fireplace delivers up to 11% energy savings versus standard fan-forced electric heaters.

The Dimplex IgniteXL Bold XLF5017-XD is backed by a 5-year limited manufacturer's warranty covering defects in materials and workmanship under normal residential use. The unit is UL/CSA safety certified under file E71416. Shipping is typically free curbside delivery from the manufacturer's warehouse via trusted freight carriers, with enhanced options like threshold or white glove delivery available for an additional fee. Lead times vary based on manufacturer stock - contact the retailer directly for current availability before ordering. All products ship factory-sealed with full quality inspection.