CAMP STOVE PIPE 4" x 2' (AC-PIPE4) 49775

Single-wall stove pipe requires a minimum clearance of 18 inches from all combustible materials including walls, ceilings, and other flammable surfaces. This clearance can be reduced by 50% to 9 inches if suitable heat shielding is installed on either the pipe or the combustible material. Heat shields must include proper airspace and ventilation to effectively protect combustible surfaces from excessive heat exposure.

This AC-PIPE4 pipe is designed as an OEM replacement part specifically for Englander camp stoves with 4-inch flue outlets. To ensure compatibility, check your owner's manual for your specific stove model's requirements. The pipe features standard 4-inch diameter sizing that works with most Englander camp stove installations, but always verify your stove's collar outlet diameter before purchasing.

Connect pipe sections with the crimped male end inserted into the non-crimped female end of the adjoining piece. Install with male ends pointing down to prevent creosote leakage. Secure each joint with either a pipe clamp or a minimum of three screws per connection to ensure a tight, stable assembly. Each section will overlap by approximately 2 inches during installation, so account for this when calculating total pipe length needed.

No, single-wall stove pipe should never pass through walls, ceilings, attics, floors, closets, or roofs. Single-wall pipe is only approved for use from the stove to the point where it enters a wall or ceiling. When penetrating walls or ceilings, you must transition to UL-listed Class A insulated chimney pipe, which requires only 2-inch clearance to combustibles and is properly rated for such installations.

Inspect the pipe regularly for creosote buildup, proper connections, and structural integrity. Clean accumulated creosote and soot as needed, typically at least once or twice during the heating season depending on use. Check that all joints remain secure and properly connected. Inspect the high-temperature paint finish for any rust spots or damage, and touch up with approved high-temperature spray paint as needed to maintain corrosion resistance and appearance.

No, Englander camp stoves and their associated piping are specifically designed for temporary installations such as wall tents, hunting camps, and portable outdoor applications. These units are not designed or approved for residential heating and must not be installed in any permanent structure including homes, mobile homes, or other dwellings. They are ideal for camping, hunting, and temporary cooking and heating needs only.

The gauge number refers to steel thickness, with lower numbers indicating thicker, more durable metal. This 22-gauge pipe is thicker and more robust than the minimum 24-gauge standard, providing enhanced durability, better heat resistance, and longer service life. The welded seam construction further improves structural integrity compared to lighter-gauge snap-lock alternatives, making this premium pipe ideal for demanding camp stove applications.

This Englander stove pipe is backed by a limited lifetime warranty for the original purchaser. The warranty covers manufacturing defects when the product is properly installed and used according to the owner's manual. Warranty coverage excludes damage from improper installation, misuse, over-firing, lack of maintenance, or unauthorized modifications. Keep your proof of purchase and register your warranty to ensure coverage and expedite any future claims.