Blue Ridge 500 High-Efficiency EPA Certified Non-Catalytic Wood Burning Stove Heater ESW0012

The Englander Blue Ridge 500 is designed to heat spaces ranging from 1,000 to 2,700 square feet, making it ideal for medium to large homes or open floor plans. The actual heating area may vary based on factors such as insulation quality, ceiling height, climate conditions, home layout, and chimney draft. With a maximum heat output of 110,000 BTU/h and an overall heat output range of 17,200 to 57,800 BTU/h, this stove provides flexible heating capacity to maintain comfortable temperatures even during power outages.

The Blue Ridge 500 offers up to 10 hours of burn time on a single load of properly seasoned cordwood. This extended burn time is made possible by the large 3.5 cubic foot firebox and efficient non-catalytic combustion system. Actual burn times may vary depending on wood type and moisture content (16-19% moisture recommended), wood species, how tightly the wood is loaded, outdoor temperature, and air control settings. For optimal performance and burn time, use well-seasoned hardwood cut to 16-22 inches in length.

Yes, the Englander Blue Ridge 500 is certified for mobile home installation when used with a fresh air intake kit. This certification is uncommon among wood stoves and provides valuable installation flexibility. The stove must be installed according to manufacturer specifications and local building codes, with proper clearances maintained. Additionally, it's approved for alcove installations, allowing placement in tighter spaces than many competing models. The reduced clearances with double-wall pipe (8 inches to back wall, 19 inches to side walls) make it particularly suitable for mobile homes and smaller living spaces.

The Englander Blue Ridge 500 comes with a limited 5-year warranty that covers defects in materials and workmanship under normal residential use. The warranty extends only to the original retail purchaser and requires proof of purchase for any warranty claims. Coverage is void if the stove is used to burn materials other than cordwood, operated improperly, over-fired, or not maintained according to the owner's manual. Damages from misuse, improper installation, lack of maintenance, or external factors like power failures and downdrafts are not covered. For warranty claims, contact your authorized Englander dealer with your model number, serial number, and dated proof of purchase.

Yes, the Englander Blue Ridge 500 qualifies for the federal residential clean energy tax credit. As an EPA 2020-certified high-efficiency wood stove, it's eligible for a tax credit of 30% of the total cost including installation, up to $2,000 per year. This credit applies to stoves purchased and installed in your primary or secondary residence. With the Blue Ridge 500's competitive pricing and this substantial tax benefit, you can significantly reduce your net investment while upgrading to clean, efficient heating. Consult with a tax professional to ensure you meet all requirements and properly claim this credit on your tax return.

The Blue Ridge 500 requires a 6-inch diameter chimney system certified to ULC-S629 or UL 103 HT standards (rated for 2100°F). The minimum chimney height is 12 feet measured from the stove flue collar, though taller chimneys often provide better draft. You can use either single-wall or double-wall stove pipe from the stove to the ceiling, with double-wall pipe allowing reduced clearances (8 inches vs. 13 3/4 inches to the back wall). From the ceiling through the roof, you must use insulated Class A chimney pipe. Proper chimney installation is critical for safe operation and optimal performance—always follow manufacturer specifications and local building codes, and consider hiring a professional installer.

The Blue Ridge 500 is significantly more efficient than older, non-EPA certified wood stoves. It achieves 71% average overall efficiency (HHV) and up to 77% optimum efficiency, compared to 40-50% for traditional stoves. The low particulate emission rate of just 1.6 g/h means it burns much cleaner than older models which can emit 15-30 g/h or more. This translates to using approximately 30-40% less wood to produce the same heat, dramatically reducing fuel costs over the heating season. The non-catalytic secondary combustion system burns gases and particulates that would otherwise escape up the chimney, extracting maximum heat from every log while minimizing creosote buildup and environmental impact.

Absolutely. The Blue Ridge 500's 10-hour burn time makes it excellent for overnight heating. To achieve extended burns, load the firebox with well-seasoned hardwood (oak, maple, or ash work best), allow the fire to establish a good coal bed, then adjust the air control to a lower setting once the wood is fully engaged. The large 3.5 cubic foot firebox holds enough fuel to maintain steady heat through the night. Many users report waking up to a warm home with live coals ready for reloading. The high-density refractory brick lining helps retain heat and radiate it into your home even as the fire burns down, ensuring consistent warmth throughout the night.