BLACK SINGLE WALL TILE CONNECTOR ADAPTER - 7"Ø SP00231

This connector is made from premium 22 gauge steel, which is approximately 60% thicker and more durable than the standard 24 gauge pipes found at many retailers. The heavier gauge provides superior heat resistance, longer lifespan, and better structural integrity. Additionally, the welded construction (versus clip-on) ensures a sturdier assembly that won't separate at the seams and provides a much more professional appearance.

Single wall stove pipe requires an 18-inch clearance to combustible materials when installed horizontally (to walls or ceilings) and a 12-inch clearance when installed vertically. These clearances are critical for fire safety. Never install single wall pipe inside a combustible wall or inside a chimney chase. If you need to reduce clearances, consider using heat shields or switching to double-wall pipe which can reduce clearances to 6 inches vertically and 8 inches horizontally.

This connector is specifically designed for 7-inch inside diameter single wall stove pipe systems. While it should be compatible with most quality 7-inch single wall pipe, it's important to note that chimney and stove pipe components from different manufacturers may not always fit together perfectly and could potentially cause serious problems. For best results and warranty protection, it's recommended to use matching components from the same manufacturer's product line.

This single wall tile connector is designed and rated for use with wood burning and coal burning stoves. It is not suitable for pellet stoves, which typically require specialized venting systems with different specifications. For gas appliances, you must use venting specifically approved for gas, as gas requires different venting materials and standards. Always consult your appliance manufacturer's specifications and local building codes before selecting venting components.

The laser welded seams provide multiple benefits over traditional clip-on pipe connections. Welded construction ensures the pipe maintains perfect roundness, making pipe-to-pipe connections much easier during installation. The welded seams eliminate potential smoke leakage points, improving safety and efficiency. Additionally, welded pipes won't separate or come loose over time from thermal expansion and contraction, and they provide a cleaner, more professional appearance without visible seams or clips.

The limited lifetime warranty provides peace of mind that this connector is built to last. The warranty typically covers defects in materials and workmanship under normal use conditions. However, warranties generally don't cover damage from improper installation, failure to maintain proper clearances, chimney fires, over-firing, or normal wear from extended use. For specific warranty terms, conditions, and claim procedures, consult the manufacturer's warranty documentation or contact customer service.

Installation of this connector typically doesn't require special tools or high-temperature sealants. The precision welded construction ensures tight-fitting connections without the need for additional sealants. Basic hand tools may be needed for securing the connection to your tile connector according to the manufacturer's installation instructions. However, always follow local building codes and the installation manual that comes with your stove and venting components. Some installations may require sheet metal screws for additional security.

Yes, this connector should be inspected and cleaned regularly as part of your overall chimney and stove pipe maintenance routine. It's recommended to inspect your entire venting system at least once per year, ideally before each heating season. During inspection, check for creosote buildup, corrosion, or any signs of damage. Clean using appropriate chimney brushes and tools designed for single wall stove pipe. Regular cleaning helps prevent chimney fires, maintains proper draft, and extends the life of your venting system.