BLACK SINGLE WALL PIPE - 6"Ø X 18"L SP00004

The SP00004 single wall stove pipe requires an 18-inch minimum clearance to combustible materials including walls, ceilings, wood mantles, and other flammable surfaces. Vertical clearance should be at least 12 inches. This clearance can be reduced by using a heat shield, which typically allows for 6-inch clearance to walls and 9 inches to ceilings. Never install single wall stove pipe through walls, ceilings, or combustible chases.

No, single wall stove pipe like the SP00004 is designed for indoor use only and should never be installed through walls, ceilings, or in areas exposed to outdoor elements. For wall penetrations and outdoor installations, you must transition to double-wall insulated Class-A chimney pipe using an appropriate stove pipe adapter or thimble connection. Single wall pipe is only suitable from your stove to the transition point inside your home.

The SP00004 features premium 22 gauge cold rolled steel construction, which is significantly thicker and more durable than the standard 24 gauge pipe found at many big box stores. The laser-welded seams (rather than snap-lock or clip-on construction) ensure perfect roundness for easier installation, eliminate smoke leakage, and provide a cleaner, more professional appearance. This superior construction is backed by a limited lifetime warranty.

Yes, every pipe joint should be properly secured for safety. You'll need either pipe clamps or at least three self-tapping stovepipe screws per connection. Many installers also use high-temperature stove cement or sealant at joints to prevent smoke leakage. The crimped male end of each pipe section fits into the female end of another pipe or fitting of the same diameter. Additional fittings like elbows, tees, dampers, and adapters may be needed depending on your installation layout.

While single wall stove pipe can technically be cut, it's not recommended as it requires special tools and proper re-crimping of the cut end to maintain proper connections. The SP00004 comes in a standard length, but My Fireplace Products offers telescoping lengths that can adjust to your needs without cutting. If you need a custom fit, telescoping sections eliminate time-consuming cutting and crimping while ensuring a perfect, secure connection.

The SP00004 single wall stove pipe includes a limited lifetime warranty from My Fireplace Products, providing long-term confidence in your purchase. This warranty covers manufacturing defects and material quality issues. The warranty demonstrates the manufacturer's commitment to superior construction using premium 22 gauge steel and laser-welded seams. For specific warranty terms, exclusions, and claim procedures, contact My Fireplace Products directly.

Yes, one of the key benefits of single wall stove pipe is that it radiates significant heat back into your living space as hot exhaust gases pass through it. This heat radiation improves your overall heating efficiency and helps maximize the warmth you get from your wood or coal stove. You can further enhance this effect by adding heat reclaimers that capture and circulate even more heat from the pipe surface back into your room instead of losing it up the chimney.

The SP00004 single wall stove pipe is designed primarily for wood and coal burning stoves. For pellet stove installations, you typically need specialized pellet vent pipe which has different construction and clearance requirements. Always check your appliance manufacturer's specifications for the correct type of venting system required. Using the wrong type of pipe can create safety hazards and may void your stove's warranty.