Wiseway GW1949 Non-Electric Pellet Stove Features

100% Non-Electric Operation: Patented gravity feed system completely eliminates the need for electricity, augers, blowers, or circuit boards, making this stove ideal for off-grid cabins, remote properties, and areas prone to power outages.
Only EPA Certified & UL Listed Non-Electric Pellet Stove: The GW1949 holds the distinction of being the only EPA-certified and UL-listed non-electric pellet stove on the market, ensuring compliance with strict emissions and safety standards.
Powerful 40,000 BTU Heat Output: Delivers up to 40,000 BTUs of clean, efficient heat capable of warming spaces up to 2,000 square feet, perfect for homes, cabins, garages, workshops, and barns.
Generous 60 lb Hopper Capacity: The oversized 60-pound hopper provides up to 30 hours of continuous burn time on the lowest setting, reducing the frequency of refueling and delivering reliable overnight heat.
Silent Operation with Zero Moving Parts: Because there are no fans, motors, or augers, the Wiseway operates in complete silence, offering peaceful warmth without the hum of traditional pellet stoves.
Natural Draft Combustion System: A natural draft drives the burn process after a simple propane torch ignition, allowing the stove to self-regulate and ramp up to operating temperature without mechanical assistance.
Radiant Heat from 3.5" Steel Tubing & Baffles: Heat radiates efficiently from the 3-1/2 inch steel tubing and rear steel baffles, providing strong, even warmth throughout the room without needing a blower.
Tight Clearance Installation: Engineered with extremely small clearances on the rear and sides, the Wiseway fits into compact spaces and is easier to install than most traditional pellet stoves.
Large Viewing Window: Enjoy the ambiance of a real pellet flame through the front window, where you can watch the flames travel up the body of the stove.
Simple Damper-Based Heat Adjustment: Heat output is controlled by easily opening and closing fresh air intakes on the front of the stove — no electronic controls or complicated programming required.
Mobile Home Approved (USA): Certified for installation in mobile homes within the United States (fresh air kit required for mobile home installations).
Versatile Venting Options: Uses standard 3-inch pellet venting that can be adapted to 4-inch or 6-inch chimney systems, and can even be exhausted through the ceiling for flexible installation.

Wiseway GW1949 Non-Electric Pellet Stove Specs

Brand	US Stove / Wiseway
Model Number	GW1949
Stove Type	Non-Electric Gravity Fed Pellet Stove
Fuel Type	PFI Certified Premium Hardwood Pellets
Heat Output	Up to 40,000 BTUs
Heating Area	Up to 2,000 sq. ft.
Hopper Capacity	60 lbs
Burn Time	Up to 30 hours on lowest setting
Ignition	Manual (propane torch)
Electricity Required	None
Operation	Silent (no moving parts)
Flue / Venting	3" pellet vent (adaptable to 4" or 6" chimney); 4" Type L certified pellet vent per manual
Heat Exchanger	3-1/2" steel tubing with rear steel baffles
Construction Material	Heavy-gauge steel
Color / Finish	Black
Heat Control	Manual front-mounted fresh air intake dampers
Viewing Window	Yes — full-height front window
Product Dimensions	18" W × 54" D × 32" H (shipping carton); approx. 15" D × 24" W × 52" H (stove)
Product Weight	198 lbs
Minimum Hearth (USA)	25" D × 44" W
Minimum Hearth (Canada)	25" D × 46" W
Certifications	EPA Certified, UL Listed (UL 1482-11, ULC-S627-00)
Mobile Home Approved	Yes (USA only; fresh air kit required)
Vent-Through-Ceiling Capable	Yes (per owner's manual specifications)
Origin	Designed and engineered in South Pittsburgh, Tennessee
Warranty	US Stove / Wiseway Wood & Pellet Stove Warranty
Shipping Method	LTL freight, palletized

Wiseway GW1949 Non-Electric Pellet Stove FAQ

Does the Wiseway GW1949 really run without any electricity?

Yes. The GW1949 is a true non-electric pellet stove. It uses a patented gravity-fed design and natural draft to feed and burn pellets, with no fans, augers, motors, or circuit boards required. This makes it an excellent heat source for off-grid cabins, remote properties, mobile homes, and any location prone to power outages.

How do I start and operate the Wiseway pellet stove?

Starting the stove is simple. You heat the burn chamber and flue with a propane torch, then start the pellet flow. The natural draft takes over and ramps the stove up to operating temperature. Heat output is then adjusted by opening or closing the fresh air intake dampers on the front of the stove — no electronic controls or thermostats are involved.

What type of pellets should I burn in the GW1949?

US Stove recommends using only PFI-certified premium hardwood pellets. The stove is specifically designed and tested for wood pellets only — burning corn, coffee pellets, or other alternative fuels is not permitted and will void the warranty.

How long does the 60 lb hopper last on one fill?

The 60-pound hopper delivers up to 30 hours of continuous heat on the lowest setting, with manufacturer references citing up to 36 hours under optimal low-burn conditions. Burn time will be shorter at higher heat settings, but the large hopper easily covers overnight burns and reduces refueling frequency.

What venting does the Wiseway require?

The stove uses a standard 3-inch pellet venting outlet that can be adapted into a 4-inch or 6-inch chimney system. The owner's manual specifies 4-inch Type L certified pellet exhaust venting. The Wiseway can be vented vertically through the ceiling, and all installations must follow the owner's manual and local codes.

What are the clearance and hearth requirements?

The Wiseway is engineered for tight installations with very small side and rear clearances. Minimum hearth dimensions are 25" D × 44" W for U.S. installations and 25" D × 46" W for Canadian installations. Always refer to the current owner's manual and your local code authority for the most accurate clearance requirements.

Can the GW1949 be installed in a mobile home?

Yes — the Wiseway is mobile home approved in the USA only. A fresh air kit is required for mobile home installations and is also recommended for newer, tightly sealed homes or any installation experiencing a poor burn due to limited makeup air. The stove must not be installed in a sleeping room.

How hot does the stove get and what about maintenance?

The front and sides of the stove get extremely hot during operation and will cause burns if touched, though the hopper and back stay relatively cool. For maintenance, US Stove recommends emptying and cleaning the burn pot before each ignition, inspecting it daily during continuous use, and keeping the flue and clean-outs free of debris to maintain proper draft and combustion.

Wiseway GW1949 Non-Electric Pellet Stove Features

Wiseway GW1949 Non-Electric Pellet Stove Specs

Wiseway GW1949 Non-Electric Pellet Stove FAQ

Wiseway GW1949 Non-Electric Pellet Stove Gravity Fed 2,000 Sq Ft Documents:

Pellet Stoves

Shop Related Fire Pits: